Use the Internet to Watch and Feed your Pet Remotely

Overview

Innovative pet feeder has a built-in IP camera for viewing your pet over the internet
Remotely play a pre-loaded tune to let your pet know that it is time to eat
Remotely release food into the bowl to keep your pet nourished
Access the camera and controls with almost any web-enabled PC or mobile device
Included combination adapter provides for safe connection of the power and Ethernet cable

Essential Info

Whether you're at work or on vacation, gain peace of mind knowing that you can remotely watch and feed your pet via the Internet. The Petwatch IP Camera and Remote Pet Feeding System has a built-in video camera, audio feeding alert and automated food release dispenser, all of which are accessible via the internet. The camera will let you keep an eye on how your pet is doing while you're away from home. If you forgot to feed your pet on the way out the door, or if you are away from home for a couple days, you can activate the audio feeding alert system to notify your pet food is on the way and select one of eight feeding levels to fill the bowl. The container holds about 700g worth of food, enough to last an average sized pet well over a week. Additionally, a manual release button is located on the feeder, so feeding your pet while at home comes at the press of a finger.

The food bowl easily separates from the feeder and is dishwasher safe. The included power and Ethernet adapter are integrated into one simple connection at the base of the feeder with a protective plastic molding that is safe for your pets. The cord splits apart at the opposite end providing convenient connection to your computer and power outlet. An On/Off switch is located on the side of the unit and an LED is located on the front of the device lets you know that it is on, whether or not the cover has been closed properly and whether or not your network connection is active. Once the Petwatch has been connected to your router via the Ethernet cable, you can access the feeder and its features from any web-enabled PC or mobile device.

Please note: Your home computer does not need to be on to remotely access the Petwatch as you login via a separate website.

Manuals/Software

What's Included

Petwatch IP Camera and Remote Pet Feeding System

Power adapter

Owner's manual

More Info

Internet Controls

Play - If you push the "Play" button, an image of your pet will be seen in the Petwatch viewer screen.

Stop - If you push the "Stop" button, the video image will stop.

Call - If you push the "Call" button, you will here the tone generated that notifies your pet that it's time to eat.

Feed - If you push the "Feed" button, food will be dispensed to your pet(s).

Feed amount (step 1-8 ) - The number next to the feed button indicates how many times 5 grams of food will be dispensed. If the number is set to 3, 15g of food will be dispensed when the 'Feed' button is pressed.

Mono - The "Mono" button cycles the screen from Gray scale mode to Color mode and back again.

Important Note: Do not over feed your pet(s). If you don't see food dispensing in the image immediately after you press the "Feed" button, wait a few seconds before pressing "Feed" again. Sometimes network status can cause the response time to be delayed.

Please remember that although this kit allows you to monitor and feed your pet remotely, it is not a substitute for normal pet care.

Specifications

Specifications
Manufacturer:	Dandelionland
Manufacturer Product No.:	Petwatch
Construction Material:	ABS plastic
Dimensions:	170mm D x 320mm L x 350mm H
Camera:	CMOS camera with a manual adjustable view
Performance:	30fps in a local network
Communication:	Via cat. 5 ethernet cable (included)
Power Supply:	120VDC, 1.5A, (adapter included)
Power Modes:	Bus Powered
Food Capacity:	700g
Maximum Food Size:	10mm
Certifications:	CSA, FCC, CE, VCCI